Hi All Anybody know how to enable IGMP for PPPoE interface ? The Radius server has return "ERX-Igmp-Enable = enable" to ERX . but the IGMP is still disabled IGMP Enable
- Specifies whether the subscriber can register to receive multicast services through Internet Group Management Protocol (IGMP). - Value - blank—Router uses default setting - disable—Disables IGMP - enable—Enables IGMP - Default—Blank Code: Access-Accept Identifier: 24 Authentic: <173><231><202>x<238><179><159><251>3<131><246><27>~<25><251><182> Attributes: Framed-IP-Address = 10.0.0.222 Framed-Protocol = PPP ERX-Local-Interface = "loopback100" Service-Type = Framed-User Framed-IP-Netmask = 255.255.255.255 ERX-Virtual-Router = "default" ERX-Igmp-Enable = enable ERX-IGMP-Version = v3 Acct-Interim-Interval = 3600 ERX1410-LNS1#test aaa ppp t...@pppoe.com xxxxx ************ user attributes ************* Authentication Grant idle Timeout - 0 monitor Ingress Only - false session Timeout - 0 accounting Timeout - 3600 Client IP Address - 10.0.0.222 pppoe Maxsession - 0 Client IP Netmask - 255.255.255.255 Client IPv6 Interface Id - 0:0:0:0 primary DNS IP Address - 10.0.0.1 secondary DNS IP Address - 10.0.0.3 primary IPv6 DNS IP Address - :: secondary IPv6 DNS IP Address - :: primary WINS IP Address - 0.0.0.0 secondary WINS IP Address - 0.0.0.0 SA Validate - disabled IGMP - disabled Ignore-DF-Bit - disabled MLD Version - MLD Version not set IGMP Version - IGMP Version: 3 IP Interface Block Multicast Sources - disabled Mobile IP algorithm - not set Mobile IP SPI - not set Mobile IP Key - not set Mobile IP Replays - not set Thanks WangGuan _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp