On Tuesday 26 January 2010 02:58:22 pm Richard A Steenbergen wrote: > Well I guess I'll go ahead and stick this one in the > archives incase anybody else hits the same problem. Here > is what happens when you try to install 9.6R2 (the > website still recommends ver 9.6R1, go figure :P) from a > 10.0R2 box on an SRX210:
<snip> ... > Which does a wonderful job of wiping out the entire box. > The only way to recover is to load a new image from the > boot loader via console, like so: > > set ipaddr=x.x.x.x > set netmask=x.x.x.x > set gateway=x.x.x.x > set serverip=x.x.x.x > install tftp://x.x.x.x/newjunosimage.bin Such fun... Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp