What software version do you use? I've seen routing troubles with software prior to 9.6R2/9.5R3

Cyrill

On 03.02.2010 23:50, Stacy W. Smith wrote:
It sounds like the forwarding table may not be in sync with the routing table 
during this time. You can check the Routing Engine's view of the forwarding 
table with:

show route forwarding-table destination 10.10.134.0 extensive

That output may help you determine if it's the Routing Engine or the PFE that 
has an incorrect forwarding entry.

--Stacy

On Feb 3, 2010, at 12:53 PM, Cord MacLeod wrote:

I have a very strange routing issue in progress.  The short of it is, I am advertising 
10.10.134.0/24 from gsw1.xxx with BGP, which is an ex4200 6 member switch.  I advertise 
this to crs1.xxx which is an ex4200 2 member switch and a route reflector.  When one of 
the crs1.xxx member switches dies, all routing dies as expected.  However when routing 
re-establishes for some reason 10.10.134.0/24 is no longer reachable even though a route 
exists for this network in BGP through out the whole network.  crs1.xxx even claims 
"no route to host" even when showing a route in it's routing table.

When the 2nd member of crs1.xxx comes back online, everything is fixed.  
Obviously this is a major issue because I now essentially have no redundancy at 
my aggregation layer, crs1.xxx.


Here's normal operation:

r...@crs1.xxx>  show virtual-chassis

Virtual Chassis ID: 0026.8868.4080
                                          Mastership            Neighbor List
Member ID  Status   Serial No    Model    priority    Role      ID  Interface
0 (FPC 0)  Prsnt    BM0xxxxxxxxx0 ex4200-24t      200  Master*    1  vcp-0
1 (FPC 1)  Prsnt    BM0xxxxxxxxx2 ex4200-24t      200  Backup     0  vcp-1

r...@crs1.xxx>  show virtual-chassis

r...@crs1.xxx>  show route 10.10.134.0

inet.0: 20 destinations, 21 routes (20 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both

10.10.134.0/24     *[BGP/170] 00:20:46, localpref 100, from 10.10.135.47
                      AS path: I
to 10.10.135.58 via ge-1/0/23.0
                      to 10.10.135.62 via ge-0/0/23.0

r...@crs1.xxx>  show bgp summary
Groups: 2 Peers: 3 Down peers: 0
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0                 4          4          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn 
State|#Active/Received/Accepted/Damped...
10.10.135.13          11XXX         27         29       0       0       10:53 
1/1/1/0              0/0/0/0
10.10.135.14          11XXX         26         29       0       0       10:47 
1/1/1/0              0/0/0/0
10.10.135.47          11XXX         28         28       0       0       10:56 
2/2/2/0              0/0/0/0


r...@crs1.xxx>  ping 10.10.134.1
PING 10.10.134.1 (10.10.134.1): 56 data bytes
64 bytes from 10.10.134.1: icmp_seq=0 ttl=64 time=1.324 ms
64 bytes from 10.10.134.1: icmp_seq=1 ttl=64 time=1.570 ms
64 bytes from 10.10.134.1: icmp_seq=2 ttl=64 time=1.285 ms
64 bytes from 10.10.134.1: icmp_seq=3 ttl=64 time=1.297 ms


Here's abnormal operation:

Virtual Chassis ID: 0026.8868.4080
                                          Mastership            Neighbor List
Member ID  Status   Serial No    Model    priority    Role      ID  Interface
0 (FPC 0)  Prsnt    BM0xxxxxxxxx0 ex4200-24t      200  Master*
1 (FPC 1)  NotPrsnt BM0xxxxxxxxx2 ex4200-24t

r...@crs1.xxx>  show bgp summary
Groups: 2 Peers: 3 Down peers: 0
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0                 4          4          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn 
State|#Active/Received/Accepted/Damped...
10.10.135.13          11XXX          3          5       0       0           8 
1/1/1/0              0/0/0/0
10.10.135.14          11XXX          2          5       0       0           2 
1/1/1/0              0/0/0/0
10.10.135.47          11XXX          4          3       0       0          11 
2/2/2/0              0/0/0/0

r...@crs1.xxx>  show route 10.10.134.0

inet.0: 14 destinations, 15 routes (14 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both

10.10.134.0/24     *[BGP/170] 00:03:35, localpref 100, from 10.10.135.47
                      AS path: I
to 10.10.135.62 via ge-0/0/23.0
{master:0}
r...@crs1.xxx>  ping 10.10.134.1
PING 10.10.134.1 (10.10.134.1): 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host


_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to