Hi Erol, you talked about CF and I overlooked that you also wrote to use it as PCMCIA Device. So I assumed you want to replace your existing CF on the RE. Am I correct? I've never done this CF-PCMCIA stuff, so sorry for the spam :-\
cheers, Christian >Thank you for link. But there is information about how to >replace CF on RE, and minimum requirements for working configuration. >I also suspect about my ULTRA CF card, but i saw some working >examples in that e-mail group. > >=================== > >I have successfully done this on RE-400s on M7i's. > >I used Sandisk 2GB Ultra II 15MB/s CFs. I believe the actual >part number is SDCFH-002G-A11. > >=================== > > >ha...@t-systems.com wrote On 18-02-2010 13:24: >> Hi there >> >> please take a look at >> >http://juniper.cluepon.net/index.php/Replacing/upgrading_the_CF_on_a_R >> E >> >> >>> I've seen somewhere on Juniper's website that the maximum >allowed CF >>> on M7i is 1GB. >>> >> I've upgraded a RE5.0 by myself and have a SanDisk >SDCJF-2048 working. >> It could be possible that fact that you try to use an Ultra CF card >> could be the problem. Could be that this is an issue with CF >> controller, try to use standard CF instead. >> >> >==========================8<========================================== >> Routing Engine REV 09 740-009459 xxxxxxxxxx RE-5.0 >> ad0 1953 MB SanDisk SDCFJ-2048 004121E1108J2007 >Compact Flash >> ad1 38154 MB ST940818AM xxxxxxxx Hard Disk >> >==========================8<========================================== >> >> cheers, >> Christian >> >> >>> >>> Regards, >>> V.Vasilev >>> >>> >>> On Thu, Feb 18, 2010 at 8:51 AM, Erol KAHRAMAN >>> <erol.kahra...@gmail.com>wrote: >>> >>> >>>> Hello, >>>> >>>> I bought a compactflash card (SanDisk Ultra 2GB) and planned >>>> >>> to use it >>> >>>> for my M7i box. However, when i insert it to my pcmci >>>> >>> interface i saw >>> >>>> that it is not in my storage device list. In my log file i >>>> >>> get the following lines: >>> >>>> /kernel: ad3: Device does not support APM >>>> /kernel: ad3: 1918MB<SanDisk SDCFH-002G HDX 5.00> at >>>> >>> ata2-master PIO4 >>> >>>> I also try to prepare CF disk as a bootable media from my >linux box. >>>> >>>> dd if=/dev/zero of=/dev/sdd1 bs=512 count=1024 dd >>>> if=install-media-10.0R2.10-domestic of=/dev/sdd1 bs=64k >>>> >>>> After rebooting my router nothing happened. >>>> >>>> What could be the problem? Is there a way to use my CF card >>>> >>> as storage >>> >>>> device in my router? >>>> _______________________________________________ >>>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>>> >>>> >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> >>> > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp