Hi, Only the IQ2 PIC supports ingress queue stats.
Truman On 19/02/2010, at 9:48 PM, meryem Z wrote: > Hello Truman, > > Thank you for your suggestion. > Finally i found that classification is correctly done but the interface is > unable to show ingress statistics (IQ PIC) unlike the IQ2 PICs. > > show interfaces queue ingress ge-0/2/0 > Ingress queue statistics are not applicable to this interface. > > is this a normal behaviour for IQ PICs or I should activate something ? > > Thanks. > > BR. > > > > Subject: Re: [j-nsp] dscp classifier doesn't work - junos 9.6 > > From: tru...@suspicious.org > > Date: Wed, 17 Feb 2010 16:26:53 +1100 > > CC: juniper-nsp@puck.nether.net > > To: merye...@hotmail.com > > > > > > On 16/02/2010, at 10:14 PM, meryem Z wrote: > > > > > > > > Hello , > > > > > > I have an M7i router with junos 9.6 R3 . > > > > > > Below it's hardware config : > > > > > > Hardware inventory: > > > Item Version Part number Serial number Description > > > Chassis A6156 M7i > > > Midplane REV 05 710-008761 CY8948 M7i Midplane > > > Power Supply 0 Rev 06 740-008537 6122911 AC Power Supply > > > Routing Engine REV 12 740-009459 9005089909 RE-5.0 > > > CFEB REV 07 750-010463 CY8890 Internet Processor II > > > FPC 0 E-FPC > > > PIC 0 REV 11 750-002970 CZ3397 4x OC-3 SONET, SMIR > > > PIC 1 REV 08 750-010238 CY7657 1x G/E SFP, 1000 BASE > > > Xcvr 0 REV 01 740-011782 PAR1XC7 SFP-SX > > > PIC 2 REV 09 750-007641 CW5063 1x G/E IQ, 1000 BASE > > > Xcvr 0 REV 01 740-011782 PAR1XFB SFP-SX > > > PIC 3 REV 10 750-005723 CZ9407 2x OC-3 ATM-II IQ, SMIR > > > FPC 1 E-FPC > > > PIC 2 BUILTIN BUILTIN 1x Tunnel > > > PIC 3 REV 08 750-009099 CY5909 1x G/E, 1000 BASE > > > Xcvr 0 REV 01 740-011782 PAR1XC3 SFP-SX > > > Fan Tray Rear Fan Tray > > > > > > > > > I configuerd a group on a sub-interface on the IQ PIC 2 , including > > > classifier , re-write rules and scheduler map. > > > > > > I'm sending traffic on this sub-interface , correctly marked (0xB8 for > > > ef) , using iperf traffic generator. Iperf server is connected to an > > > extreme alpine switch. > > > > > > when I issue show interface queue i see that all the traffic is on the BE > > > queue , no matter the marking is. > > > > > > my Cos configuration is : > > > > > > mer...@liscr2> show configuration class-of-service interfaces ge-0/2/0 > > > unit 1004 > > > apply-groups cos_customer_ivo; > > > > > > mer...@liscr2> show configuration groups cos_customer_ivo > > > class-of-service { > > > interfaces { > > > <ge-*/*/*> { > > > unit <*> { > > > scheduler-map sch_map_ivo; > > > classifiers { > > > dscp classify_dscp; > > > } > > > rewrite-rules { > > > dscp rewrite_dscp; > > > ieee-802.1 default; > > > } > > > } > > > } > > > } > > > } > > > > > > > > > mer...@liscr2> show configuration class-of-service classifiers dscp > > > classify_dscp > > > import default; > > > forwarding-class best-effort { > > > loss-priority high code-points 000001; > > > } > > > > > > mer...@liscr2> > > > > > > Is there anything wrong with the config ? > > > > > > > > > Thank you. > > > > > > Hi Meryem, > > > > Perhaps you can try with a MF classifier (ie. firewall) that matches on the > > DSCP field to verify that the traffic is being marked correctly upon > > ingressing into ge-0/2/0.1004? You can have an action of a forwarding class > > as well: > > > > [edit firewall family inet] > > r...@r1# show > > filter foo { > > term 1 { > > from { > > dscp ef; > > } > > then forwarding-class expedited-forwarding; > > } > > } > > > > Then you can verify everything before you switch back to BA classification. > > > > Truman > > > > Hotmail : une messagerie fiable avec la protection anti-spam performante de > Microsoft Inscrivez-vous _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp