> -----Original Message----- > From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp- > boun...@puck.nether.net] On Behalf Of Shane Ronan > Sent: Tuesday, February 23, 2010 11:59 AM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] Controlling which IP on an Interface is used for PIM > > I have two IP addresses on an Interface, which is connected to an > upstream network which has a Multicast source on it. I am running PIM, > but the PIM requests are being sent from the wrong IP, is there a way > to specify which of the two IP's should be used for the PIM requests?
You should be able to set the primary or preferred knobs on the IP address with you'd like to source the traffic from. If the two IPs are in the same subnet, use the preferred knob. If the two IPs are in different subnets, use the primary knob. Stefan Fouant, CISSP, JNCIE-M/T www.shortestpathfirst.net GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp