Alessandro Inzerilli skrev:
Hello,
I'm looking for JunOS MIBs giving access to diagnostic optics
information, basically what you see issuing the CLI command
show interfaces diagnostics optics
Physical interface: so-0/0/0
Laser bias current : 21.392 mA
Laser output power : 0.2970 mW / -5.27 dBm
Module temperature : 46 degrees C / 115
degrees F
Module voltage : 3.2020 V
Receiver signal average optical power : 0.0195 mW / -17.10 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 80.000 mA
Laser bias current low alarm threshold : 2.000 mA
Laser bias current high warning threshold : 70.000 mA
Laser bias current low warning threshold : 4.000 mA
Laser output power high alarm threshold : 1.2590 mW / 1.00 dBm
Laser output power low alarm threshold : 0.0440 mW / -13.57 dBm
Laser output power high warning threshold : 0.7940 mW / -1.00 dBm
Laser output power low warning threshold : 0.0700 mW / -11.55 dBm
Module temperature high alarm threshold : 110 degrees C / 230
degrees F
Module temperature low alarm threshold : -40 degrees C / -40
degrees F
Module temperature high warning threshold : 93 degrees C / 199
degrees F
Module temperature low warning threshold : -30 degrees C / -22
degrees F
Module voltage high alarm threshold : 3.900 V
Module voltage low alarm threshold : 2.700 V
Module voltage high warning threshold : 3.700 V
Module voltage low warning threshold : 2.900 V
Laser rx power high alarm threshold : 1.1748 mW / 0.70 dBm
Laser rx power low alarm threshold : 0.0039 mW / -24.09 dBm
Laser rx power high warning threshold : 0.7942 mW / -1.00 dBm
Laser rx power low warning threshold : 0.0100 mW / -20.00 dBm
Does anybody know if the MIBs exist? I couldn't find anything on
juniper tech docs.
Thanks,
Alessandro
Maybe this could point you in the correct direction?
http://forums.cacti.net/about23089.html
--
Bjørn Tore Paulen
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
