I did, and it seems to set the metric on the route, regardless of
interface.
On Mar 11, 2010, at 9:28 PM, Stefan Fouant wrote:
-----Original Message-----
From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
boun...@puck.nether.net] On Behalf Of Shane Ronan
Sent: Thursday, March 11, 2010 4:53 PM
To: Juniper Puck
Subject: [j-nsp] Prefer RIP Neighbor
Hello list,
I have exhausted all of my capabilities to figure out the answer to
this question, so I am hoping you can help.
I have two connections to the same network, which both provide me
routes via RIP for Multicast sources.
Is there a way for me to prefer the routes I receive via one of the
connections over there other?
Real stupid question, but did you try the metric-in statement to
adjust the
metric for the route from one of the neighbors, assuming both
neighbors are
not on the same interface...
Stefan Fouant, CISSP, JNCIE-M/T
www.shortestpathfirst.net
GPG Key ID: 0xB5E3803D
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp