Hello , There is no "loss-priority" criteria to match on it. Possible completions are below:
Thanks. # set firewall filter test_plp term 1 from ? Possible completions: > address Match IP source or destination address + ah-spi Match IPSec AH SPI value + ah-spi-except Do not match IPSec AH SPI value + apply-groups Groups from which to inherit configuration data + apply-groups-except Don't inherit configuration data from these groups > destination-address Match IP destination address + destination-class Match destination class + destination-class-except Do not match destination class + destination-port Match TCP/UDP destination port + destination-port-except Do not match TCP/UDP destination port > destination-prefix-list Match IP destination prefixes in named list + dscp Match Differentiated Services (DiffServ) code point + dscp-except Do not match Differentiated Services (DiffServ) code point + esp-spi Match IPSec ESP SPI value + esp-spi-except Do not match IPSec ESP SPI value first-fragment Match if packet is the first fragment + forwarding-class Match forwarding class + forwarding-class-except Do not match forwarding class fragment-flags Match fragment flags (in symbolic or hex formats) + fragment-offset Match fragment offset + fragment-offset-except Do not match fragment offset + icmp-code Match ICMP message code + icmp-code-except Do not match ICMP message code + icmp-type Match ICMP message type + icmp-type-except Do not match ICMP message type > interface Match interface name + interface-group Match interface group + interface-group-except Do not match interface group > interface-set Match interface in set + ip-options Match IP options + ip-options-except Do not match IP options is-fragment Match if packet is a fragment + packet-length Match packet length + packet-length-except Do not match packet length + port Match TCP/UDP source or destination port + port-except Do not match TCP/UDP source or destination port + precedence Match IP precedence value + precedence-except Do not match IP precedence value > prefix-list Match IP source or destination prefixes in named list + protocol Match IP protocol type + protocol-except Do not match IP protocol type service-filter-hit Match if service-filter-hit is set > source-address Match IP source address + source-class Match source class + source-class-except Do not match source class + source-port Match TCP/UDP source port + source-port-except Do not match TCP/UDP source port > source-prefix-list Match IP source prefixes in named list tcp-established Match packet of an established TCP connection tcp-flags Match TCP flags (in symbolic or hex formats) tcp-initial Match initial packet of a TCP connection [edit] mer...@liscr2# set firewall filter test_plp term 1 from > Date: Thu, 11 Mar 2010 07:14:31 -0500 > Subject: Re: [j-nsp] Verify loss priority for a forwarding class > From: addy.mat...@gmail.com > To: merye...@hotmail.com; david....@orange-ftgroup.com; > juniper-nsp@puck.nether.net > > Meryem: > > Maybe try a firewall filter with a counter on the egress interface? > Something like: > > from forwarding-class <forwarding-class_name> > from loss-priority high > then count fc-blah_lp-high > then accept > > --Addy. > > > On 3/11/10, meryem Z <merye...@hotmail.com> wrote: > > > > Hello David , > > > > Thanks for your response, but this command is supported M320 routers and > > T-series routing platforms only.. > > Is there any equivalent for M7i routers ? > > > > > > Thank you. > > > > > >> From: david....@orange-ftgroup.com > >> To: merye...@hotmail.com > >> CC: juniper-nsp@puck.nether.net > >> Date: Wed, 10 Mar 2010 14:12:10 +0100 > >> Subject: RE: [j-nsp] Verify loss priority for a forwarding class > >> > >> Hi, > >> > >> You can view drops at the fabric level via the command : > >> > >> show class-of-service fabric statistics > >> > >> David > >> > >> > >> > >> > >> David Roy > >> Orange France - RBCI IP Technical Assistance Center > >> Tel. +33(0)299876472 > >> Mob. +33(0)685522213 > >> Email. david....@orange-ftgroup.com > >> > >> > >> -----Message d'origine----- > >> De : juniper-nsp-boun...@puck.nether.net > >> [mailto:juniper-nsp-boun...@puck.nether.net] De la part de meryem Z > >> Envoyé : mercredi 10 mars 2010 13:17 > >> Cc : juniper-nsp@puck.nether.net > >> Objet : [j-nsp] Verify loss priority for a forwarding class > >> > >> > >> hello Community, > >> > >> I configured a forwarding class with high priority loss. Now I need to > >> verify that the traffic sent under this forwarding class ( using a traffic > >> generator) has a high priority loss. The "show interface queue " doesn't > >> show this information. is there any other way to do it ? > >> > >> Thank you. > >> > >> > >> > >> _________________________________________________________________ > >> Votre messagerie et bien plus où que vous soyez. Passez à Windows Live > >> Hotmail, c'est gratuit ! > >> https://signup.live.com/signup.aspx?id=60969 > >> _______________________________________________ > >> juniper-nsp mailing list juniper-nsp@puck.nether.net > >> https://puck.nether.net/mailman/listinfo/juniper-nsp > >> > >> ********************************* > >> This message and any attachments (the "message") are confidential and > >> intended solely for the addressees. > >> Any unauthorised use or dissemination is prohibited. > >> Messages are susceptible to alteration. > >> France Telecom Group shall not be liable for the message if altered, > >> changed or falsified. > >> If you are not the intended addressee of this message, please cancel it > >> immediately and inform the sender. > >> ******************************** > >> > > > > _________________________________________________________________ > > Hotmail : une messagerie performante et gratuite avec une sécurité signée > > Microsoft > > https://signup.live.com/signup.aspx?id=60969 > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > -- > Sent from my mobile device _________________________________________________________________ Hotmail : une messagerie performante et gratuite avec une sécurité signée Microsoft https://signup.live.com/signup.aspx?id=60969 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp