On Thursday 18 March 2010 01:15:56 am youssef chagh wrote: > Can I connect 2 sites (cisco switches ) each one to an > Extreme with a trunk ports (many vlans on the ciscos ), > and using a L2VPN/L2circuit , so that the entire path > between the 2 Extreme will be vlan transparent (It's > like the QinQ )?
If you run the pw in port-based mode (which, it appears, you would given the PIC's you have on the M7i and M20), you should be able to pass Layer 2 control and data frames transparently between the Extreme switches, as though they were connected back-to-back. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp