1. Check your security zone to ensure you're allowing ping on both devices, and that the vlan.xxx interfaces are part of the zone:
i.e.: security { zones { security-zone trust { interfaces { vlan.99 { host-inbound-traffic { system-services { all; } protocols { all; } } } vlan.10 { host-inbound-traffic { system-services { all; } protocols { all; } } } 2. Also check your policies on the trust zone (just to ensure its there); policies { from-zone trust to-zone trust { policy allow-all { match { source-address any; destination-address any; application any; } then { permit; } } } On 2010-04-08, at 9:26 AM, Morten Isaksen wrote: > I forgot the members [ ... ] part and that caused the vlan to be down. > But after I added the members line the vlan was up but I was not able > to ping bettween the two J2320, so same result. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp