Has this been changed in ver 10.1. I am still not able to apply a firewall filter to an interface on egress.
[edit interfaces ge-0/0/4 unit 0 family inet] 'filter' Referenced filter 'CAR-FILTER' can not be used as policer not supported on egress error: configuration check-out failed -b -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Matt Peterson Sent: Tuesday, April 13, 2010 2:42 PM To: joe mcguckin Cc: Juniper-Nsp Subject: Re: [j-nsp] EX-3200-24T questions Joe, This is all well documented.. On Tue, Apr 13, 2010 at 12:05:09PM -0700, joe mcguckin wrote: > Can this switch perform ingress and egress rate limiting per interface? http://www.juniper.net/techpubs/en_US/junos10.1/topics/concept/firewall-filter-ex-series-overview.html#jd0e30 > QoS features? Depends if you count CoS as QoS http://www.juniper.net/techpubs/en_US/junos10.1/topics/concept/cos-components-ex-series.html > MPLS features like VLL (e,g, EoMPLS), etc. http://www.juniper.net/techpubs/en_US/junos10.1/topics/concept/mpls-ex-series-overview.html#jd0e47 > QinQ? http://www.juniper.net/techpubs/en_US/junos10.1/topics/example/qinq-tunneling-ex-series.html > Native V6 in hardware & V6 routing protocols? An "advanced feature" license is required for v6 routing http://www.juniper.net/techpubs/en_US/junos10.1/topics/concept/ex-series-software-licenses-overview.html --Matt _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp