Hi, When configuring two route reflectors on same clusters for redundancy purpose, does it matter if the backup reflector is configured inside the same group for clients?
For example: group RRclients type internal cluster 1.1.1.1 neighbor "client1" neighbor "client2" neighbor "RR2" group NonRRclients type internal neighbor "client3" Or is it mandatory configure the other RR out of the group where cluster ID is configured? Like this: group RRclients type internal cluster 1.1.1.1 neighbor client1" neighbor "client2" group NonRRclients type internal neighbor "client3" neighbor "RR2" I guess my question/confusion is because on Cisco we have explicity command to define neighbor as RRclient or notRRclient, and the backup RR is not configured as client. As Juniper does not have so, I need to know if Juniper will consider the backup RR as client if I configure it inside the group where "cluster" command is used. Comments appreciated. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp