Hi folks.
I'm having a hard time getting a 'stock configuration' done on JunOS for eBGP peering.. Been reading Juniper docs and keep circling back with more questions than answers ;) Could someone get me pointed in the right direction? . In Cisco, we do this: neighbor xxx.32.235.39 remote-as 12345 neighbor xxx.32.235.39 peer-group peering-exchangename neighbor xxx.32.235.39 description xxxxxxxxxx neighbor xxx.32.235.39 activate neighbor xxx.32.235.39 maximum-prefix 100 95 neighbor peering-exchangename peer-group neighbor peering-exchangename send-community neighbor peering-exchangename route-map inbound-exchangename in neighbor peering-exchangename route-map outbound-exchangename out route-map inbound-exchangename permit 10 set metric +110 set local-preference 200 set community 11666:2000 11666:2002 additive route-map outbound-exchangename permit 10 match community 100 set metric 110 I realize that there's quite a bit going on here - just need some samples of folks doing similar and I'll be "off to the races". ;) Cheers, Paul _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp