Hi, There is no link flap. At the same interface I have about 1000 other VLANS and about 5000 other MAC's and they don't flap. The problem affects only a one or a few MAC's at a time. I should double check for a bridging loop but I don't believe there is one.
I use Junos 10.1R1 Regards: Emil On Sat, May 22, 2010 at 5:25 PM, Chuck Anderson <c...@wpi.edu> wrote: > On Fri, May 21, 2010 at 06:13:42PM +0300, Emil Katzarski wrote: >> I have a switch EX3200-48T with quite simple L2 config. Once in a >> while I can see some MAC addresses learned on the correct interface >> and VLAN, but then (less than a second later) the MAC is deleted. >> I can also see the "Immediate aging" counter increasing. > > Are you seeing link flaps or port errors? Is it possible there is a > bridging loop? What JUNOS version are you running? > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp