Hello, Can i do the following on Juniper router?
CE(1,2,3,etc) - PE1 -- core -- PE2 -- CE2 Currently CE{1,2,3,etc) routes are in PE global table (inet.0). CE{1,2,3,etc) are internet customers a) leak CE's prefixes from global to a VRF on PE1 what would be the best way to approach this? i was thinking of tagging all CE's prefixes with community and copy it to VRF using rib-groups or is there a simpler option available? what kind of vrf instance would this be since there would be no interface assosiated with it and can routes in this instance be exchanged on VRF in PE2 using iBGP. b)after prefixes are copied into VRF on PE1. now CE2 (traffic reinjection) will send traffic destined to CE1 prefixes via VRF tunnel. c) Once traffic gets to VRF on PE1, how can it forward it to the appropriate CE? is this possible in VRF routing table: destination <CE1> via inet.0 (CE1-interface). destination <CE2> via inet.0 (CE2-interface). i.e traffic is forwarded out to CE1-interface directly without any route lookup in inet.0. Regards, --tim _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp