Thanks, I'll use the suggestion Mohan, established neighborhoods EBGP between Ls1 and LS2 to LS3
Gabriel. 2010/5/29 Alan Gravett <alan...@gmail.com> > Gabriel, > > You cannot copy routes between Logical Systems, as there is a separate RPD > instance > for each LS. (unlike VRs where rib-groups etc can be used) > > If you have tunnel capabilities in the chassis (check for presence of lt-* > interface) you can interconnect LS's in this way. > > Alan > > > On Fri, May 28, 2010 at 10:24 PM, Gabriel Farias < > gabrielfaria...@gmail.com> wrote: > >> Thanks this would be the only option? >> >> Best regard, >> Gabriel Farias >> >> >> >> 2010/5/28 Mohan Nanduri <mohan.nand...@gmail.com> >> >> > you can configure bgp session between the logical systems, as they are >> like >> > a true separate router. >> > >> > On Fri, May 28, 2010 at 3:27 PM, Gabriel Farias < >> gabrielfaria...@gmail.com >> > > wrote: >> > >> >> Hello Gentlemen, >> >> >> >> >> >> I have a chassis M10i (Junos 9.6R1.13) with three-logical systems (LS1, >> >> LS2 >> >> and LS3) configured and running, need to copy the routing tables of the >> >> LS1 >> >> and LS2 to LS3, I have some questions: >> >> >> >> >> >> >> >> 1) Can I copy this? >> >> >> >> 2) How best to do if possible? >> >> >> >> >> >> Done in consultation with J-net and also in part of Juniper support >> site >> >> and >> >> found much documentation, but nothing talking about this specific >> issue. >> >> >> >> Thanks, >> >> Gabriel Farias >> >> _______________________________________________ >> >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> >> > >> > >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp