hello , I guess You can see stats about dropped packets with the "show interface ge-0/0/0 extensive" command ..
u...@host> show interfaces ge-2/3/0 extensive Physical interface: ge-2/3/0, Enabled, Physical link is Up Interface index: 20, SNMP ifIndex: 16 Link-level type: Ethernet, MTU: 1400, Source filtering: Disabled Speed: 1000mbps, Loopback: Disabled, Flow control: Enabled Device flags : Present Running Interface flags: SNMP-Traps Link flags : None Current address: 00:90:69:01:61:59, Hardware address: 00:90:69:01:61:59 Statistics last cleared: Never Traffic statistics: Input bytes : 300 0 bps Output bytes : 93636 22400 bps Input packets: 5 0 pps Output packets: 101 2 pps Input errors: Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Policed discards: 0 L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0 FIFO errors: 0 > Date: Thu, 1 Jul 2010 13:35:17 +0545 > From: janasa...@wlink.com.np > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] dropped packet counter and stat of traffic policer > > Hi, > > I am testing the rate limiting in junos 9.2, M7i series. Everything is > working as expected but, I could not find and figure out the command > which can show the statistics specially the dropped/discard packets > counter by the traffic police rules. Any tips would be appreciated. > > sa...@gw-router# show > term test-limit-prefix { > from { > destination-address { > 0.0.0.0/0; > } > } > then { > policer test-police; > count test-count; > accept; > } > } > > [edit firewall filter test-traffic-limit] > > sa...@gw-router# > > sa...@gw-router# show firewall policer test-police > if-exceeding { > bandwidth-limit 256k; > burst-size-limit 16k; > } > then discard; > > [edit] > > > sa...@gw-router> show policer ? > Possible completions: > <[Enter]> Execute this command > <policer> Policer name > __auto_policer_template_1__ > __auto_policer_template_2__ > __auto_policer_template_3__ > __auto_policer_template_4__ > __auto_policer_template__ > __default_arp_policer__ > | Pipe through a command > sa...@gw-router> show policer > > > sa...@gw-router> show firewall filter test-traffic-limit > > Filter: test-traffic-limit > Counters: > Name Bytes > Packets > test-count 173823870 4588919 > Policers: > Name Packets > test-police-test-limit-prefix 290558 > > sa...@gw-router> > > > sa...@gw-router# show interfaces ge-0/0/0 > description "sw-test Gi0/1"; > vlan-tagging; > unit 0 { > vlan-id 12; > family inet { > filter { > output test-traffic-limit; > } > address 192.168.0.1/24; > } > } > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _________________________________________________________________ Hotmail : une messagerie performante et gratuite avec une sécurité signée Microsoft https://signup.live.com/signup.aspx?id=60969 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp