Hi guys, Im at a complete loss regarding this issue. And the documentation at J is a bad mess of RE based flow sampling, and M series stuff mixed with MX/MS-DPC stuff.
1 .Do I need to prep the MS-DPC more than ? : aggregated-devices { ethernet { device-count 1; } } fpc 1 { pic 0 { adaptive-services { service-package layer-3; } } pic 1 { adaptive-services { service-package layer-3; } } } network-services ip; 2. Anyone has a working configuration for netflow v9 on MX ? 3. And what is the purpose of the source address statement under / forwarding-options/output/interface, where is this address used ? Im running 10.1R1.8 and the suggested config in the docs for 10.1 gives me a deprecated warning. Here is my config: forwarding-options { sampling { input { family inet { rate 1; } family mpls { rate 1; } } output { ## Warning: 'output' is deprecated flow-inactive-timeout 30; flow-active-timeout 60; flow-server 213.173.238.14 { port 9990; version9 { template { ip-template; } } } interface sp-1/0/0 { source-address 1.1.1.1; } } } } Kind regards, Peter Krupl _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp