In configuration mode, type 'replace pattern ls- with lsq-'. That should replace any occurence of ls- with lsq-. You should probably also run "show | compare" afterward to ensure that this made the expected changes.
-Jon On Fri, Jul 30, 2010 at 10:48 AM, Brad Fleming <bdfle...@gmail.com> wrote: > When upgrading JunosES software from 9.6 to 10.0R3 the ls-0/0/# interface > needs to be changed to lsq-0/0/#. This needs to happen on the actual > interface on any physical interfaces in the bundle. Does anyone know of a > graceful way to perform this task? Does anyone know why Juniper decided to > change the name of the interface (certainly makes no sense to me)? > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp