On Tue, Aug 10, 2010 at 01:56:01PM +1000, Ben Dale wrote: > Yes - I've been told this is due in 10.4 > > Not sure of your application, but you can still place your st0 interface > inside a routing-instance, but the outgoing-interface specified in the IPSEC > GW configuration must be present in inet.0 I'm not using st-interfaces. I was trying to set up dial-up IPSEC server with xauth. > On 10/08/2010, at 12:02 AM, Walter Keen wrote: > > > When i was evaluating an SRX earlier, I was told this was on the roadmap, > > with a date of 'before the end of the year'. Not sure if it's the same > > timeline for your application. > > > > > > -----Original Message----- > > From: juniper-nsp-boun...@puck.nether.net on behalf of Alexander Shikoff > > Sent: Mon 8/9/2010 5:53 AM > > To: juniper-nsp > > Subject: [j-nsp] IKE gateway within routing-instance > > > > Hello, > > > > Does anyone know are there new JunOS versions for J-series that have > > support for > > IKE gateway within routing-instance? Thanks. > > > > -- > > MINO-RIPE > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp
-- MINO-RIPE _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp