Charlie, > > what L2 load balancing hashing is done on the EX 4200 series? > > There is no "forwarding-options hash-key" configuration statement. > > I have two interfaces, ae0 and ae1 that run BGP in a 2 member VC stack. > Behind the VC stack is a row of PCs with their own LAG aeX's. > > Will ae0 and ae1 be load balanced across the switch stack at Layer-2, or > will it just be a primary/secondary failover setup? > > I would prefer to get above the 1Gbps single links somehow, but I can't > tell if it will be possible from the documentation (unless I buy an MX). > > Regards, > C.
I don't quite understand your config. You have different BGP neighbours on ae0 and ae1 in a virtual chassis, that is, you have layer3 connections on these interfaces? Please elaborate, maybe add a nice ASCII diagram ;) Kind regards, Felix -- Felix Schüren Head of Network ----------------------------------------------------------------------- Host Europe GmbH - http://www.hosteurope.de Welserstraße 14 - 51149 Köln - Germany Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*) HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678 Geschäftsführer: Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller (*) 0,14 EUR/Min. aus dem dt. Festnetz; maximal 0,42 EUR/Min. aus den dt. Mobilfunknetzen _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp