Hi, all: I am trying to understand the radius authentication process supported by Juniper routers. on JNCIS book:
[quote]A user supplies a name of Scott to the remote authentication server, which accepts the request. However, Scott is not a current username in the local password database. In this situation, the router maps Scott to the default username of "remote".[/quote] [quote]In short, the remote server may authenticate a user with the name of Sally but inform the router that Sally should be mapped to the local name of Beth for purposes of assigning rights and privileges on the router.[/quote] so I have an user named "admin" on juniper routers. then all of other users who registered in radius server must be mapped to this local user of "admin"? does this local user "admin" have to be registered with radius server too? is the following configuration (file "users") for radius server good enough? test Auth-Type := Local Cleartext-Password := "1234567890", Juniper-Local-User-Name = "admin" _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp