Thanks, Will. I had the host-inbound-traffic system-services dhcp configured but I still cannot get the clients to receive an IP address from the dhcp server. Regards, Joe
-----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Will McLendon Sent: 01 September 2010 00:39 To: juniper-nsp@puck.nether.net Subject: [j-nsp] Help with DHCP relay issues on J2350 running 9.6 code Make sure you have DHCP as an allowed service on the reth interface in the Zone configuration: set security zones security-zone <zone> interfaces reth0.0 host-inbound-traffic system-services dhcp I think that will do the trick. good luck, Will McLendon On Aug 31, 2010, at 3:24 PM, juniper-nsp-requ...@puck.nether.net wrote: > Help with DHCP relay issues on J2350 running 9.6 code Hi, I recently migrated from Cisco ASA firewall to Junos 9.6 on J2350 series but I cannot get DHCP relay to work with the DHCP clients sitting behind the firewall. My configs below: set forwarding-options helpers bootp relay-agent-option set forwarding-options helpers bootp interface reth0.0 server x.x.x.x set forwarding-options helpers bootp interface reth0.0 server x.x.x.x Any ideas? Many thanks, Regards, Joe _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp