You can also try to use multi-topology. Rgs
On 9/14/10, Felix Schueren <[email protected]> wrote: > Henri Khou wrote: >> Hello, >> >> I'm trying to find the best way to redistribute BGP default route to 2 >> independant organizations running OSPF with a different cost for each >> organization. >> I am used to Cisco IOS where you can run 2 OSPF instance by specifying a >> process ID for every OSPF instance. >> How can I do that under JunoS? >> > basically, you can't. You'll have to create routing instances & figure > out a way to redistribute the routing information using rib groups and > most likely "next-table statics". It's probably easier to redesign it in > some way, maybe you can use plain BGP? > > Kind regards, > > Felix > > > -- > Felix Schüren > Head of Network > > ----------------------------------------------------------------------- > Host Europe GmbH - http://www.hosteurope.de > Welserstraße 14 - 51149 Köln - Germany > Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*) > HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678 > Geschäftsführer: > Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller > > (*) 0,14 EUR/Min. aus dem dt. Festnetz; maximal 0,42 EUR/Min. aus > den dt. Mobilfunknetzen > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Sent from my mobile device ./diogo -montagner _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
