Yes it is supported as it is documented in: http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/pic-m10i-chan-0c3-stm1-iqe.html
<http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/pic-m10i-chan-0c3-stm1-iqe.html>But never hurt to check with your juniper rep :) Cheers On Thu, Oct 7, 2010 at 7:21 PM, Rolf Mendelsohn <rolf-...@internet.ao>wrote: > Hi All, > > I just wanted to inquire if anybody had used the following card, to split 1 > x STM-1, into 3 x DS-3's? > > PE-2CHOC3-STM1-IQE-SFP > > > I understand from the Cisco website, that the Cisco card (PA-MC-STM-1SMI) > is not capable of being split into 3 x DS-3's. > > > http://www.cisco.com/en/US/prod/collateral/modules/ps2033/ps2762/product_data_sheet09186a008007d6c0.html > "Clear channel STM-1, E3, and subrate E3 are not supported." > > Thanks, > Rolf > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp