i'm new to juniper, i come from cisco background. i'm trying to build InterAS OptionC MP-eBGP with Cisco on one side and Juniper on other.
Two issues i have - 1. I stumbled upon inet.3 table. In case of ldp signaled mpls vpn setup, how does inet.3 get populated? I had to add a static discard route for bgp next-hop to make the received mpls vpn prefixes valid. what's the logic? Most of the examples i see has traffic engineering related explanation which i'm not using. What's the importance of "resolve-vpn" keyword? is it only required in inter-as scenario where we have a remote PE in different AS? 2. What are the commands to troubleshoot MPLS VPN data plane ? On cisco, its easy to use debug mpls packcets etc. to check the flow. I cant see anything on juniper other than trace and ping. the exact issue i'm facing is listed here - * http://forums.juniper.net/t5/Junos/MPLS-VPN-Trobleshooting-InterAS-MP-eBGP/td-p/56316 * <http://forums.juniper.net/> traffic from cisco AS to Juniper AS is getting dropped in juniper AS, where i cant figure out. Traffic from other side is reaching correctly. Many thanks. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp