Doug,
I think that for lt- interfaces to actually work You need either a T-PIC or "set chassis fpc X pic Y tunnel-services" knob and AFAIK neither is supported on EX
http://www.juniper.net/techpubs/en_US/junos10.3/topics/reference/statement-hierarchy/chassis-ex-series.html
Rgds
Alex

----- Original Message ----- From: "Doug Marschke" <d...@proteus.net>
To: <juniper-nsp@puck.nether.net>
Sent: Thursday, October 28, 2010 12:41 AM
Subject: [j-nsp] ho to tie 2 VR's together on EX4200


I would figure an LT interface like other platforms but it doesn't allow for
an encapsulation. Ideas?



{master:0}[edit interfaces lt-0/0/0]

l...@s13# show

unit 0 {

   point-to-point;

   peer-unit 1;

   family inet {

       address 10.1.2.1/30;

   }

}

unit 1 {

   peer-unit 0;

   family inet {

       address 10.1.2.2/30;

   }

}



{master:0}[edit interfaces lt-0/0/0]

l...@s13# commit

[edit interfaces lt-0/0/0]

 'unit 0'

    encapsulation needs to be configured for logical tunnel interface

error: configuration check-out failed



{master:0}[edit interfaces lt-0/0/0]

l...@s13# set unit 0 ?

Possible completions:

 <[Enter]>            Execute this command

 accounting-profile   Accounting profile name

+ apply-groups         Groups from which to inherit configuration data

+ apply-groups-except  Don't inherit configuration data from these groups

 bandwidth            Logical unit bandwidth (informational only)

 description          Text description of interface

 disable              Disable this logical interface

 dlci                 Frame Relay data-link control identifier (1..1022)

family               Protocol family

 mtu                  Maximum transmission unit packet size (256..9216)

 no-traps             Don't enable SNMP notifications on state changes

 peer-unit            Peer unit number (0..16385)

 point-to-point       Point-to-point connection

 traps                Enable SNMP notifications on state changes

tunnel               Tunnel parameters

 vlan-id              Virtual LAN identifier value for 802.1q VLAN tags

 |                    Pipe through a command

{





l...@s13# run show version

fpc0:

--------------------------------------------------------------------------

Hostname: s13

Model: ex4200-24t

JUNOS Base OS boot [9.5R2.7]

JUNOS Base OS Software Suite [9.5R2.7]

JUNOS Kernel Software Suite [9.5R2.7]

JUNOS Crypto Software Suite [9.5R2.7]

JUNOS Online Documentation [9.5R2.7]

JUNOS Enterprise Software Suite [9.5R2.7]

JUNOS Packet Forwarding Engine Enterprise Software Suite [9.5R2.7]

JUNOS Routing Software Suite [9.5R2.7]

JUNOS Web Management [9.5R2.7]



{master:0}[edit interfaces lt-0/0/0]







Doug Marschke

Chief Technology Officer

JNCIE-ER #3, JNCIE-M #41, JNCIS-FW, JNCI

(415) 902-5702 (cell)

(415)-358-4059 (fax)

www.proteus.net



_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to