I have few ProLabs GLC-T-C 1000BASE-T SFP's. If I insert this SFP into EX4200-24F switch, both Admin and Link status are immediately "up". Admin status should be "up" by default, but I find it odd, that Link status stays "up" as well even if there is no cable connected to the SFP.
When I insert the SFP, "show log messages" shows following error/warning: Oct 9 17:42:36 chas[727]: IFCM: no handler for command subtype 226 JUNOS version is 10.3R1.9 and switch model is EX4200-24F. Any ideas, what might cause such odd behavior, where interface Link status is set "up" even if there is no cable connected to the port? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp