On Fri, Nov 12, 2010 at 05:58:33PM +0200, Alexander Shikoff wrote: > Hello, > > I'm unable to display ARP table on my M10i box with JunOS 9.5R1.8. > > minot...@br1-gdr.ki> show arp no-resolve expiration-time > ... and silence. > > The command is just hanging and there is no any output, but I'm still able > to break it with Ctrl+C. > > What may be a reason of such behavior? > Thanks in advance.
'clear arp' also hangs. when 'clear arp' or 'show arp' are being executed "top" shows: last pid: 35703; load averages: 1.02, 0.91, 0.60 up 34+17:03:02 14:31:12 62 processes: 2 running, 60 sleeping CPU states: 22.9% user, 0.4% nice, 76.0% system, 0.8% interrupt, 0.0% idle Mem: 472M Active, 96M Inact, 119M Wired, 49M Cache, 69M Buf, 1308K Free Swap: 1536M Total, 4020K Used, 1532M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 35700 root 1 122 0 2560K 1896K RUN 6:56 93.85% arp [...] Did anyone have such issue in the past? -- MINO-RIPE _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp