Thanx Ulf ! It works ! :) Created an IP-CLACL for matching my traffic Created an IP-policy for assigning a traffic-class to the IP-CLACL
Created a VLAN-CLACL for matchting the traffic-class Created an VLAN-policy to set the user-priority for the VLAN-CLACL Assigned the IP-policy to an interface inbound and the VLAN-policy to an interface outbound Kind regards, Tom ________________________________________ Van: Ulf Bremer [ulf.bre...@gmail.com] Verzonden: maandag 15 november 2010 10:42 Aan: Tom Teeuwen Onderwerp: Re: [j-nsp] ERX 802.1p marking / user-priority Hi, you need a VLAN-policy, as this is the only policy type that can set the 802.1p-bits. According to http://www.juniper.net/techpubs/en_US/junose11.2/information-products/topic-collections/policy-management/topic-14387.html#id-51379 the only match criteria supported in a VLAN-clacl are: color, traffic class or user packet class so you can either: - have your vlan-policy refer to a vlan-clacl that matches on already set (at ingress?!) color, tc or upc or - create an IP-policy referring to the ip-clacl (which you've defined below), have it set color, tc or upc, attach it as egress policy and then do the above. Hope this help. Best Regards Ulf Hello, I'm trying to achive the following: I have multiple VLAN subinterfaces with dynamic PPPoE interfaces. I would like to mark packets destined from specified networks with "VLAN prio 802.1p = 5" (user-priority) Created a classifier-list: ip classifier-list mylist ip 10.10.10.0 0.0.0.255 any vlan policy-list MyPol classifier-group mylist I receive the following error: % interface type mismatch in policy elements Looks like i can only link vlan classifiers to vlan policy-lists .... Someone an idee how to fixt this ? Kind regards, Tom _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp