Hi, We are running a mixed MPLS network consisting both of cisco and juniper routers. Im missing the "default-information originate" knob for BGP peers in Junos.
It seems the solution is to install a static default route, and advertise that to the CE's. But i do not want the default route to be advertized to the other PE's. At the following URL: http://www.juniper.net/techpubs/en_US/junos10.1/information-products/topic-collections/config-guide-vpns/topic-33742.html#id-10149663 I found the "vrf-export" statement, and did as described in the "Configuring an Export Policy for the PE Router's VRF Table" section. As soon as I apply, the export policy below, nothing is announced for the VRF to the other PE's. term export-0 { from protocol [ static direct ospf rip bgp ]; then accept; } term 1 { then reject; } I have searched other threads in this forum, and found the "vpn-apply-export" option. Which should be disabled as im neither peering eBGP or running RR on the PE in question. . And I do not need to both apply the vrf-export, and then the bgp-export policies at the same time. Any hits or solutions would be greatly appreciated. Kind Regards, Peter Krüpl _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp