Hi Marlon, Usually the shell access is used only by JTAC.
You can use the log here to simulate "terminal monitor". Rgs On 11/28/10, Marlon Duksa <mdu...@gmail.com> wrote: > Hi, > Does anyone know how to enter the shell on E320? > I read in one of the posts on this list that in order to enable LAC and LNS > in the same box on E320, a "pppLnsBylassLocalDomain' command needs to be > entered in the shell mode. But it does not say how do you enter the shell > mode. > > Furthermore how do you enable and monitor L2TP sessions? The 'debug' > command has a very limited options and there is nothing like 'configure > monitor' on Cisco to display the debug output on the screen? > > Thanks, > Marlon > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Sent from my mobile device ./diogo -montagner _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp