Sure thing. I'll pull this info tomorrow. The m10i has 9.6R4.4 with ASII PIC.
It's a one-armed router and it's only mission is to be the PIM-SM RP.
Thanks,
Phil
----- Original Message -----
From: "Smith W. Stacy" <st...@acm.org>
To: "Philip Palanchi" <palan...@rutgers.edu>
Cc: "juniper-nsp" <juniper-nsp@puck.nether.net>
Sent: Wednesday, December 15, 2010 2:00:52 PM
Subject: Re: [j-nsp] PIM SM RP issue
Hi Phil,
Could you share some additional info? This certainly sounds like either a
misconfiguration or a bug, but without additional info, it's very hard to
diagnose.
Helpful info would include:
JUNOS version
relevant config snippets from the Juniper RP and Cisco first-hop routers
'show pim rps extensive'
'show pim statistics'
'show system processes extensive'
'show system statistics'
PFE process and traffic statistics
'start shell pfe network <cfeb0|fpxX>'
'ps'
'show pfe statistics traffic'
--Stacy
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
