Hi folks.
I'm doing my first ERX based software upgrade on a lab box. Reading through the docs, I have finally figured out the steps involved and how to use FTP to upload the files etc. In one of the steps it says: Task 7: Identify the Files to Transfer To identify all the files for the release, open the software release (.rel) file on the ERX software CD with a text editor. The software release file contains a list of all the files associated with the release. You must transfer the software release file and all the files it contains to the user space. When I open up the 1Gig+ zip file I find the actual .rel file. It has a huge list of files to select from. How do I know which files I need? This is an ERX-310 with an 8 port HDE card... towards the bottom of the text file there is a series of "subsystem" sections. One of them says "required" and then the other sections are named similar to that of modules we could have installed (but don't such as OC-12). So I'm thinking we need to transfer these files up to the box - am I on the right track? I would just upload all of them but there's not enough space on the system to hold an image (it's over 1 Gig and the flash is only 1 Gig) Subsystem; required srp.exe srpBoot.cmp srpBootSymbols.sym srpDiag.exe srpIc.exe srpIcDiag.exe srpStartup.exe srpTechSupport.cmd otfConversions510.otf srp40.exe srp40Boot.cmp srp40BootSymbols.sym srp40Diag.exe srp40Startup.exe srp40TechSupport.cmd otfConversions40.otf srp310.exe srp310Boot.cmp srp310Diag.exe srp310Startup.exe srp310TechSupport.cmd otfConversions310.otf release.ini EndSubsystem; Subsystem; codeconv otfConversions510.otf ic510_cconv.hfx otfConversions40.otf ic40_cconv.hfx otfConversions310.otf ic310_cconv.hfx EndSubsystem; Subsystem; ge ge.exe geDiag.cmp ifaFc.exe oc12aBoot.cmp oc12aExtendedBoot.cmp oc12aStartup.exe efaFc.exe geFpgas.cmp geVeFpgas.cmp geTechSupport.cmd oc12aIssuBoot.exe ge_cconv.hxe ge_cconv.hfd EndSubsystem; Subsystem; vts (NO IDEA ON THIS ONE) Subsystem; ut3f12 (NO IDEA ON THIS ONE) Subsystem; ge2 (difference between GE and GE2 I have no idea) ge2.exe ge2Diag.cmp ge2Boot.cmp ge2Startup.exe ge2Fpgas.cmp ge2ISP.cmp pia750FxFc.exe ge2TechSupport.cmd ge2IssuBoot.exe ge2_cconv.hfd ge2_cconv.hxe ge2PTE.cmp EndSubsystem; Thanks, Paul _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp