Hello,
I have M10i box and a IP-IP tunnel to remote office:
minot...@cr1-gdr.ki> show configuration interfaces ipip
unit 0 {
tunnel {
source 109.68.40.33;
destination 212.109.41.180;
}
family inet {
mtu 1460;
address 109.68.40.157/30;
}
}
The tunnel is running, I can ping remote side from M10i box:
minot...@cr1-gdr.ki> ping 109.68.40.158
PING 109.68.40.158 (109.68.40.158): 56 data bytes
64 bytes from 109.68.40.158: icmp_seq=0 ttl=64 time=20.347 ms
^C
--- 109.68.40.158 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max/stddev = 20.347/20.347/20.347/0.000 ms
But it seems that M10i does not route anything to this tunnel:
I cannot ping 109.68.40.158 from any other place of my network.
What's wrong with it? Thanks in advance.
--
MINO-RIPE
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
