sorry, the whole config on LS1 is: r1@M5:r1# run show configuration protocols pim interface fe-0/2/0.129 { mode dense; version 2; } interface fe-0/2/0.12 { mode dense; version 2; }
I tried to put a static mroute with: igmp { interface fe-0/2/0.222 { static { group 239.1.2.3; } } } which did not make it in the mroute table either. V.Vasilev On Wed, Jan 19, 2011 at 10:33 PM, Vladislav Vasilev <vvasi...@vvasilev.net> wrote: > Hello, > > I am trying to figure out what is wrong with the following setup: > > Streamer (239.1.2.3) ---> fe-0/2/0.129 (Logical System 1) fe-0/2/0.12 > <---> fe-0/2/1.21 (Logical System 2) ---> Receiver > > I have the following configuration on LS1: > > r1@M5:r1# run show configuration protocols pim > interface fe-0/2/0.129 { > mode dense; > version 2; > } > > The multicast traffic is hitting the fe-0/2/0.129 interface but the > router is not populating its mroute table: > > r1@jncie:r1# run show multicast route > Family: INET > > Family: INET6 > > Even if I try to put the mcast group as a static group on either LS1 > or LS2 it does not make it in the mroute table. > > I am running JunOS 9.3R4.4. > > Thanks! > > Best Regards, > V.Vasilev > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp