Hello all, we are running 2x EX4200 in a VC with BGP default route 0.0.0.0/0 over ports ge-0/0/23 and ge-1/0/23
The JunOS version is 10.0S10 The interfaces ge-0/0/0 and ge-1/0/0 are a aggregate interface "ae0" and trunked to the rack-switch. The problem is, that the VC is not exporting sflow data to the collector. I have set it up like http://kb.juniper.net/InfoCenter/index?page=content&id=KB14855 (85.XXX.24.12 is the collector IP) # set collector 85.XXX.24.12 udp-port 6343 # set interfaces ge-0/0/0 # set interfaces ge-1/0/0 # set polling-interval 20 # set sample-rate 1000 sflow { polling-interval 20; sample-rate 1000; collector 85.XXX.24.12; interfaces ge-0/0/0.0; interfaces ge-1/0/0.0; } I have even tried to put the uplink interfaces (ge-0/0/23 and ge-1/0/23) to the interface section of sflow. # show sflow gives me as "Agent ID" 85.XXX.23.1 This "Agent ID" 85.XXX.23.1 is automatically configured from: vlan { unit 0 { family inet; } unit 101; unit 102 { family inet { address 85.XXX.23.1/27; # show sflow collector counts the send samples, but at the collector is not receiving anything. I have checked it with tcpdump, there is no traffic from the "Agent ID". Do I have a fault in my configuration ? Thanks a lot. Giovanni _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp