Hi Experts
I tried to verify load balancing on the reth interface for SRX 650 connected to logical router, but I can see that SRX always use one link although we have two physical links between the router and the active node and one link between the router and the passive node. I am pinging directly from router to the FW. I need to load balance through the active links. The configuration is as follows: test@FW1# show interfaces reth0 vlan-tagging; redundant-ether-options { redundancy-group 1; lacp { active; } } unit 5 { description c1; vlan-id 5; family inet { address 172.16.0.2/30; } } ge-2/0/1 { gigether-options { redundant-parent reth0; } } ge-2/0/2 { gigether-options { redundant-parent reth0; } } ge-11/0/1 { gigether-options { redundant-parent reth0; } } {primary:node0}[edit] test@ FW1# run show interfaces reth0 detail Physical interface: reth0, Enabled, Physical link is Up Interface index: 128, SNMP ifIndex: 539, Generation: 131 Link-level type: Ethernet, MTU: 1518, Speed: 2Gbps, BPDU Error: None, MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled, Flow control: Disabled, Minimum links needed: 1, Minimum bandwidth needed: 0 Device flags : Present Running Interface flags: SNMP-Traps Internal: 0x0 Current address: 00:10:db:ff:10:00, Hardware address: 00:10:db:ff:10:00 Last flapped : 2011-03-16 15:32:01 UTC (05:11:25 ago) Statistics last cleared: 2011-03-16 20:27:45 UTC (00:15:41 ago) Traffic statistics: Input bytes : 317180 1952 bps Output bytes : 490982 2936 bps Input packets: 2881 0 pps Output packets: 3815 1 pps Logical interface reth0.5 (Index 66) (SNMP ifIndex 583) (Generation 131) Flags: SNMP-Traps 0x0 VLAN-Tag [ 0x8100.5 ] Encapsulation: ENET2 Statistics Packets pps Bytes bps Bundle: Input : 1001 0 84060 0 Output: 1001 0 102046 0 Link: ge-2/0/1.5 Input : 1001 0 84060 0 Output: 1001 0 102046 0 ge-2/0/2.5 Input : 0 0 0 0 Output: 0 0 0 0 ge-11/0/1.5 Input : 0 0 0 0 Output: 0 0 0 0 Marker Statistics: Marker Rx Resp Tx Unknown Rx Illegal Rx ge-2/0/1.5 0 0 0 0 ge-2/0/2.5 0 0 0 0 ge-11/0/1.5 0 0 0 0 Security: Zone: trust And the load balance policy: test@FW1# show routing-options forwarding-table { export ECMP; } test@FW1# show policy-options policy-statement ECMP term load-balance { then { load-balance per-packet; } } BR, _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp