I would suggest the MX80. Doug
-----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of cjwstudios Sent: Wednesday, March 23, 2011 11:50 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] M7i Hello Juniper folks :) I'm setting up a remote metro ethernet site (fiber in a closet) that will have 2 x 100mb BGP transit feeds and a smattering of IGP feeds. The traffic will be service provider transit without inspection, NAT or other services. Since everything is cost sensitive these days I initially planned on implementing an ebayish 7206vxr-npe-g1. Although I was quite happily slinging the 7206 around 10 years ago I realized tonight that it has been 10 years and the 7206 platform is well aged. M7i (M7i 2AC 2FE w/ RE400,PE-1GE-SFP) are quite common on the secondary market now and likely more than enough to get started. Although trunking multiple metro FE feeds to a single GE port will be frowned upon I may consider this as an option. I suppose my questions are whether a base M7i config out of the box will support this application or if there are better options out there. Thank you in advance. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp