Has anyone tried running 10.4R3 on a M working as a MPLS-PE? Reason is I am experiencing an odd issue with an M10i not forwarding CE traffic when I have two DS-3s installed with equal cost. A/JTAC and my SE have been unable to figure this out and are pulling a brand C and saying upgrade code and all your woes will go away.
On Tue, Mar 22, 2011 at 12:18 PM, Richard A Steenbergen <r...@e-gerbil.net>wrote: > On Tue, Mar 22, 2011 at 05:18:47PM +0100, bas wrote: > > >From what I read it was; In the field (Ras, Raphael) we see 10.3r3 as > > the better choice, and people who talk to JTAC say 10.4r2 is the > > better choice. > > Oh and btw, I have multiple confirmed reports of YET ANOTHER major > memory leak in mib2d in 10.4R2. Hope everyone learned their lesson about > trusting JTAC version recommendations. :) > > From 10.4R3 release notes: > > The mib2d process leaks memory during SNMP walks. [PR/586074: This issue > has been resolved.] > > I'm going to assume it's that. :) > > -- > Richard A Steenbergen <r...@e-gerbil.net> http://www.e-gerbil.net/ras > GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp