What is in the system services stanza? On Mar 24, 2011, at 10:59 PM, Chris Kawchuk wrote:
> Should just work. Ensure me0.0 is not defined anywhere in the interfaces {} > stanza. > > i.e.: > > interfaces { > ge-0/0/0 { > unit 0 { > family ethernet-switching; > } > } > ge-0/0/1 { > unit 0 { > family ethernet-switching; > } > } > ge-0/0/2 { > unit 0 { > family ethernet-switching; > } > } > > etc.... > > vlan { > unit 0 { > family inet { > address your-management-ip-here/24; > } > } > } > } > > routing-options { > static { > route 0.0.0.0/0 next-hop somewhere-useful-on-your-LAN; > } > } > > vlans { > default { > l3-interface vlan.0; > } > } > > - Chris. > > > > On 2011-03-25, at 4:17 AM, Henri Khou wrote: > >> Hello, >> >> I have a Juni EX-4200 with an out-of-band management interface configured. >> It works like a charm. >> Then I needed to connect to my switch through the Internet so I have treied >> to connect via ssh to a l3-interface but I failed miserably. >> Is there a limitation regarding l3-interace or a configuration statement >> that prevent in-band access? >> >> Thanks >> >> Henri >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp