I have no configs go hand but have done with VPLS with J and C no problem. Can you post the following?
"show bgp sum" and "show bgp neighbor" for peering with the huawei PE in question. I assume you peer directly with the huawei and not via a RR? "show conf routing-instance" for vpls instance "show route table bgp.l2vpn.0" Do you have any hidden routes received form the huawei PE? If so do you have an inet.3 resolve for the BGP protocol next hop? If there is a mis match in local and remote PE route-targets the bgp.l2vpn.0 will not hold a copy of the huawei advertisement as they will of been discarded as non matching. Only RR or boxes with keep-all would hold non matching RT's Phill On Tue, Mar 29, 2011 at 2:25 PM, meryem Z <merye...@hotmail.com> wrote: > > Hello Community, > > Does any one already tests Juniper BGP based VPLS interoperability with other > vendors? I have some trouble to make it work with huawei routers. BGP peering > is Up but no vpls connections. > please to communicate your configuration of both sides. > > Thanks a lot. > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp