MTU...

On 4/1/11, Keegan Holley <keegan.hol...@sungard.com> wrote:
> We migrated a trunk connection from Cisco 7206 to MX480. All the BGP session
>> was up for a while & goes down. The following is the error message in
>> MX480
>> (10.2R2.11):
>>
>> rpd[1358]: task_connect: task BGP_remoteAS.a.b.c.d.14+179 addr
>> a.b.c.d+179:
>> Operation not permitted
>> rpd[1358]: bgp_connect_start: connect a.b.c.d (External remote AS):
>> Operation not permitted
>>
>> What messages do you get from the cisco box?  The operation not permitted
> message seems out of place if no changes were made.  Does the peering come
> right back up after the error happens?  Any interface flaps in the logs? Can
> you telnet to port 179 from both routers?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 
Sent from my mobile device
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to