You can using shaping in outbound direction. set class-of-services interface ge-0/0/0 shaping 20m
On Thu, Apr 21, 2011 at 4:09 PM, Ala' Amira <aam...@bluezonejordan.com>wrote: > Good morning all, > > > > Am trying to add bandwidth limitation on EX3200 on port or vlan using > firewall policer and it is working as input filter correctly but when I do > it as output filter it gave me an error " can not be used as policer not > supported on egress " . > > Here is my config : > > > > EX3200# show firewall > > family ethernet-switching { > > filter egress-port { > > interface-specific; > > term default { > > then policer limit; > > } > > } > > } > > policer limit { > > if-exceeding { > > bandwidth-limit 100k; > > burst-size-limit 10k; > > } > > then discard; > > } > > > > > > EX3200# show interfaces ge-0/0/11 > > unit 0 { > > family ethernet-switching { > > port-mode access; > > vlan { > > members MGMT; > > } > > filter { > > output egress-port; > > } > > } > > } > > > > > > I have found a rule that says " policing is on ingress and shaping is on > egress " so can I do the limitation on the outbound or the egress > interface > ??? > > > > Regards, > > Ala Amira > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- BR! James Chen _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp