We were using two tunnels to separate peers. 1 to a pci network and another for office workers to be on our normal user network.
I will see if I can dig up details later today Will Sent from my iPad On Apr 29, 2011, at 9:05 AM, "Dale Shaw" <dale.s...@gmail.com> wrote: > Hi Stefan, > > On Friday, April 29, 2011, Stefan Fouant <sfou...@shortestpathfirst.net> > wrote: >> I have successfully built IPsec tunnels using a Secure Tunnel interface >> terminating in both 'virtual-router' and 'forwarding' Routing Instances >> using Junos 10.4R4.3. I also had no problems getting OSPF up and running >> using both Multipoint or Point-to-Point configurations. >> > > Interesting! > > Like Will, I've been bitten by the "OSPF over st0.x in a routing > instance" problem. For us it seems to pop up when there are multiple > tunnels (in discrete instances) established between the same peers. > > Did your testing happen to include the multiple tunnels scenario? > > Will, do you happen to have a PR # for the problem? We've experienced > it on 10.0R3 and R4. It's not widely supported in those releases but > Juniper initially told us it should work. It's the #1 reason we're > looking at 10.4. > > Cheers, > Dale _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp