All, I have a pair of 4200's in a VC config. Just happened to look at the "show chassis routing-engine" command the other day and saw...
root@agg1.pit1> show chassis routing-engine Routing Engine status: Slot 0: Current state Master Temperature 36 degrees C / 96 degrees F DRAM 1024 MB Memory utilization 19 percent CPU utilization: User 11 percent Kernel 88 percent Interrupt 1 percent Idle 0 percent Model EX4200-24T, 8 POE Serial ID BM0208388984 Start time 2009-08-18 01:02:43 EDT Uptime 639 days, 13 hours, 10 minutes, 15 seconds Load averages: 1 minute 5 minute 15 minute 1.13 1.17 1.16 Routing Engine status: Slot 1: Current state Backup Temperature 29 degrees C / 84 degrees F DRAM 1024 MB Memory utilization 14 percent CPU utilization: User 8 percent Kernel 4 percent Interrupt 0 percent Idle 88 percent Model EX4200-24T, 8 POE Serial ID BM0208417115 Start time 2009-08-18 01:02:43 EDT Uptime 639 days, 13 hours, 10 minutes, 15 seconds Load averages: 1 minute 5 minute 15 minute 0.06 0.09 0.07 These are still running 9.3R4.4, is there some commands I could use to see why the kernel is at 88%? Thanks, Brendan _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp