Dear Sir,
Thanks...... I got......following are the commands....only three commands & you are done.................... show pppoe subinterface full | i mac show ip interface tengigabitethernet2/0/0. TenGigabitEthernet2/0/0. line protocol Ppp is up, ip is up ( IP address y.y.y.y ) Access routing = enabled: Using x.x.x.x show subscribers | i x.x.x.x Best Regards Tausif Mehmood Cell# +92 333 855 4911 Email:engr.mehm...@yahoo.com ________________________________ From: Tausif Mehmood <engr.mehm...@yahoo.com> To: Thiago Lizardo <thiliza...@gmail.com> Cc: "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> Sent: Mon, May 30, 2011 7:50:27 PM Subject: Re: [j-nsp] Tracing username through MAC in Juniper E320. Dear Sir, Sorry to bother you again but still this will give us all the users working on that VLAN not our required username.But if there are hundreds of users on that Vlan then we are unable to sort out. Best Regards Tausif Mehmood ________________________________ From: Thiago Lizardo <thiliza...@gmail.com> To: Tausif Mehmood <engr.mehm...@yahoo.com> Cc: "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> Sent: Mon, May 30, 2011 6:23:21 AM Subject: Re: [j-nsp] Tracing username through MAC in Juniper E320. With the vlan subinterface information, you can get the username with: show subscribers interface ethernet <vlan interface> Is that what you need? Regards, Thiago Lizardo de Moraes Em 29/05/2011, às 11:20, Tausif Mehmood <engr.mehm...@yahoo.com> escreveu: Dear Sir, > >Thanks but it gives only interface with VLAN info through which we can trace >DSLAM & then user port but it still don't give us username.I want to trace >username or at least IP with that MAC please. If anyone can help......... > > > Best Regards >Tausif Mehmood > > > >From: Thiago Lizardo <thiliza...@gmail.com> >To: Tausif Mehmood <engr.mehm...@yahoo.com> >Cc: "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> >Sent: Sun, May 29, 2011 6:41:28 AM >Subject: Re: [j-nsp] Tracing username through MAC in Juniper E320. > >Dear Tausif, > >I use the command below to find the subscriber interface through MAC. > >show pppoe subinterface full | include MAC > >Regards, > >Thiago Lizardo de Moraes >Telecom Support Coordinator > >Em 27/05/2011, às 13:01, Tausif Mehmood <engr.mehm...@yahoo.com> escreveu: > >> Dear All, >> >> Hope you all will be fine. i m a fresh nut in your field...... I have a >> query >> related to Juniper E320. >> >> I have a subscriber MAC but unable to trace his username . I can trace >> Subscriber MAC using his username but don't know how to trace Subscriber >> username through MAC. >> I have tried a lot but unsuccesful so i m posting here. kindly share the >> commands if you know please.... >> >> Best Regards >> Tausif Mehmood >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp