Serge, I ve seen almost the same behavior, and after reboot with MIC it was cleared (properly recognized). We have 15 mx80, and already twice I have seen the same like you. And I hope you tried online button near MIC
-----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Serge Vautour Sent: Monday, June 20, 2011 11:29 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] MX80 MIC won't come online Hello, We're trying to turn up a new MIC in an MX80. The MIC has been inserted in slot 1 and the box sees it: user@box> show chassis fpc pic-status Slot 0 Online PIC 0 Online 4x 10GE XFP Slot 1 Online PIC 0 Online 10x 1GE(LAN) SFP PIC 1 Online 10x 1GE(LAN) SFP PIC 2 Offline PIC 3 Offline There are also log entries for FRU insertion. When we try to online to card we get: user@box> request chassis mic fpc-slot 1 mic-slot 1 online FPC 1, MIC 1 is empty We tried the new MIC in another MX80 and it comes up fine. Any suggestions other than a bad slot? Thanks, Serge _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp