If the BGP peer in the master Routing Engine has negotiated address-family
capabilities that are not supported for nonstop active routing, then the
corresponding BGP neighbor state on the backup Routing Engine shows as idle.
On switchover, the BGP session is reestablished from the new master Routing
Engine.
http://www.juniper.net/techpubs/en_US/junos11.1/topics/reference/requirements/nsr-system-requirements.html#nsr-bgp
Note, for instance, inet-vpn multicast AFI is not supported for NSR.
HTH
Rgds
Alex
----- Original Message -----
From: "saurabh sood" <saurabh...@gmail.com>
To: <juniper-nsp@puck.nether.net>
Sent: Saturday, June 25, 2011 2:40 PM
Subject: [j-nsp] Output for "show bgp summary" is showing different on
twoREs
Hello,
I have observed a different scenario, i don't know wthr it is by expected
or
not.
Router has two REs and GRES, NSR is enabled also commit synchronize is
there.
But while checking the output for "show bgp summary" then on Master RE
everything is showing ok.
On the other hand backup RE is showing all bgp states IDLE.
Is it an expected behavior?
Regards,
Sunny
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
